Composite ID systems

Lenses: Four (on the LX400 camera) or six (on the LX600 camera) matched 110mm portrait quality lenses. Lenses are in focus with a camera to subject distance of 40-56 inches.

Select Switch: Set this switch to 1 to make four different pictures on each sheet of film. Set at 2 to make a two pairs of identical pictures of two different subjects on each sheet of film. Set at 4 (with the LX400 camera) or 6 (with the LX600 camera) to make four/six identical pictures of one subject. The select switch setting can be changed at any time without double exposing any pictures.

Power requirements: Cameras operate off of 108-130 volts AC. Cameras that operate on 208-240 volts AC are also available.

Aim Light System: The cameras utilize a heads up aim light system. Press Aim and a light beam projects out the front of the camera. You tilt and/or pan the camera until the spot of light is on the chin of the subject. Your subject is properly framed at this time and all you do is press Shutter to take the picture.

Light - Dark Control: You set this control to vary the brightness of the picture. This control has sixteen positions allowing you to utilize current and future instant films under a wide variety of conditions.

Pull Film Reset: When you pull the film, the camera is automatically reset to take the next pictures.

Memory: The camera has a non volatile memory chip and will remember the number of pictures remaining on a sheet of film indefinitely.

Strobe Boost: You press and release Boost to turn the strobe boost on for your next picture.

Tripod Mount: Allows mounting the camera to a desk stand or tripod.